Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLim, Yi Junen_US
dc.identifier.citationLim, Y. J. (2022). Optimising dopant concentration of hole transport layer to achieve high efficiency and stability perovskite solar cells. Final Year Project (FYP), Nanyang Technological University, Singapore.
dc.description.abstractPerovskite solar cells (PSCs) have gained much interest in the photovoltaic (PV) industry thanks to their high absorption efficiency, tuneable electronic properties, ease of fabrication, and high efficiency enable to reach up to 25.2% in 2020 which is close to mature Silicon Photovoltaic (PV) technologies. However, the instability of perovskite cells, especially the thermal stability, remains a challenge in the commercialization of perovskite solar cells. Investigations have shown that the possible root cause of instability might be due to the additives, such as Li-TFSI and t-BP, in the conventional Spiro-OMeTAD hole transport layer (HTL). The preliminary observations reveal that thermal instability is still observable regardless of different Li-TFSI and t-BP concentrations. Therefore, alternative doping using tris (pentafluoro phenyl) borane (TPFB) will be explored to achieve a balance between efficiency and long-term thermal stability in this current work. The results show that the optimized TPFB concentration was found at 0.02 mmole, as indicated by 77% retained PCE after being stored inside an oven (85 C, 10% RH) for 696 hours. In contrast, the conventional Spiro-OMeTAD doped with Li-TFSI and t-BP shows accelerate PCE drop. In-depth observations reveal that despite similar hole extraction capability of all Spiro-OMeTAD conditions (pristine, TPFB doped, Li-TFSI doped), an increase in hydrophobicity, higher conductivity, and retained amorphous phase of Spiro-doped TPFB HTL may contribute to the high efficiency and long-term thermal stability of the devices. The more robust properties of the TPFB doped HTL subsequently lead to retained underneath perovskite morphology and composition, in addition to their intact interface, ensuring efficient charge extraction in the device. These results show that the thermal stability of Spiro-OMeTAD based HTL can be tuned simply through dopant engineering to manipulate both the electrical and physical properties.en_US
dc.publisherNanyang Technological Universityen_US
dc.titleOptimising dopant concentration of hole transport layer to achieve high efficiency and stability perovskite solar cellsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorNripan Mathewsen_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.description.degreeBachelor of Engineering (Materials Engineering)en_US
item.fulltextWith Fulltext-
Appears in Collections:MSE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
  Until 2022-10-08
2.03 MBAdobe PDFUnder embargo until Oct 08, 2022

Page view(s)

Updated on Jul 1, 2022

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.