Please use this identifier to cite or link to this item:
|From 3D to 4D printing with flexible resin
|Engineering::Materials::Material testing and characterization
|Nanyang Technological University
|Chen, S. (2022). From 3D to 4D printing with flexible resin. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/157527
|The ability to shape memory polymers (SMPs) and the development of 3D printing technology have fueled the progress of 4D printing. The properties of the SMPs, together with the suitable response stimuli, help the application of 4D printing proliferates in various industries such as dental and surgical healthcare. This project focus on the thermoset SMP from 3D printing to 4D printing to study the elastic property and the influence of the temperature. The flexible parts were printed by Stereolithography (SLA), which is one of the Vat Photopolymerization 3D printing processes, to study the recovering steps from the “freezing stable” state of the deformed shape to the original shape. The controllable recovery sequence was studied and analyzed to achieve the prediction of progressive recovery.
|School of Mechanical and Aerospace Engineering
|Appears in Collections:
|MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
|Chen Shuo FYP Report_From 3D to 4D Printing with Flexible Resin.pdf
|Chen Shuo FYP Report
|Under embargo until May 10, 2025
Updated on Feb 28, 2024
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.