Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/157741
Title: Modeling and compensation of asymmetric piezo-actuated flexure-based system hysteresis
Authors: Zhou, Chao
Keywords: Engineering::Mechanical engineering::Robots
Engineering::Mechanical engineering::Control engineering
Issue Date: 2021
Publisher: Nanyang Technological University
Source: Zhou, C. (2021). Modeling and compensation of asymmetric piezo-actuated flexure-based system hysteresis. Doctoral thesis, Nanyang Technological University, Singapore. https://hdl.handle.net/10356/157741
Abstract: Micro-manipulation is extremely challenging as it requires high repeatability of the system, as well as superior accuracy of the control algorithm. Piezo-actuated flexure-based systems are very popular in micro-manipulation applications, such as handheld surgical robots, auto-focusing optical systems, high precision fabrication tools and other applications. One of the biggest challenges in using these systems in dynamic applications is the undesired hysteresis. Various methods are proposed to model and compensate for the hysteresis behavior, and it is yet not well solved. Limitations of state-of-the-art literature exist in modeling and compensating the asymmetric and rate-dependent hysteresis behavior of piezo-actuated flexure-based systems. Among the popular operator-based models, the Prandtl-Ishlinskii (PI) hysteresis model stands out because it is easier to be implemented and has less computational complexity in analytical inversion. In this work, the asymmetric and rate-dependent system hysteresis behavior is studied. A dual-operators based modified PI (DPI) hysteresis model is proposed with dual-operators modeling the expansion and contraction curves respectively. Experimental results show that the DPI model reduced the RMSE by 30% compared with the modified PI model with dead-zone operators (MPI), and by 76% compared with the PI model. The most significant contribution of this work is the rate-dependent dual-operators based modified PI (RDPI) model derived from the DPI model. Using functions of rates as the properties of operators and two observers, the RDPI model can model and compensate for the asymmetric and rate-dependent system hysteresis. Experimental results show that the RDPI model can reduce the RMSE by around 24% compared with the DPI model. A controller based on the RDPI model is designed and implemented in a hand-held surgical device, enhancing the microsurgery performance by reducing the standard deviation of the stitches distribution by around 50%.
URI: https://hdl.handle.net/10356/157741
DOI: 10.32657/10356/157741
Rights: This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).
Fulltext Permission: embargo_20230512
Fulltext Availability: With Fulltext
Appears in Collections:MAE Theses

Files in This Item:
File Description SizeFormat 
thesis_zhouchao.pdf
  Until 2023-05-12
21.89 MBAdobe PDFUnder embargo until May 12, 2023

Page view(s)

87
Updated on Nov 26, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.