Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/157797
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLuqmanul Haziq Kamarudinen_US
dc.date.accessioned2022-05-23T12:00:07Z-
dc.date.available2022-05-23T12:00:07Z-
dc.date.issued2022-
dc.identifier.citationLuqmanul Haziq Kamarudin (2022). Test and design of built-up stainless steel stub columns. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/157797en_US
dc.identifier.urihttps://hdl.handle.net/10356/157797-
dc.description.abstractAn investigation on the ultimate compressive load capacity of 2 configurations of screw-fastened Built-Up Stainless Steel stub column sections is presented in this report. Austenitic stainless steel grade EN 1.4301 plates were first press-braked into C-channels and cut to their desired lengths, before being connected by self-drilling screws to form the 2 cross-sections. Initial geometric and imperfection measurements were done to establish the dimensions and geometric irregularities of the specimens. The material properties of the specimens were then established through tensile coupon tests. A total of 20 specimens were then subjected to stub column tests to study their compressive resistances and local buckling behaviour. The compressive strengths of the specimens from the stub column tests were used to evaluate the accuracy and capability of 2 existing design codes – Eurocode 3 and American Society of Civil Engineers Specifications, in predicting the compressive capacities of the stub column specimens. It was found that both codes were able to closely predict the compressive strengths of the specimens, with similar degrees of accuracy. With certain overlap thickness factors used, the predicted compressive strengths of the 2 codes were also conservative in predicting the compressive capacities of these stub column specimens.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationST-23en_US
dc.subjectEngineering::Civil engineering::Structures and designen_US
dc.titleTest and design of built-up stainless steel stub columnsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorZhao Ouen_US
dc.contributor.schoolSchool of Civil and Environmental Engineeringen_US
dc.description.degreeBachelor of Engineering (Civil)en_US
dc.contributor.supervisoremailou.zhao@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:CEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
ST23- Test and Design of Built-Up Stainless Steel Stub Columns.pdf
  Restricted Access
12.05 MBAdobe PDFView/Open

Page view(s)

125
Updated on May 23, 2024

Download(s)

9
Updated on May 23, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.