Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/157850
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLau, Elizabeth Mary Jia Enen_US
dc.date.accessioned2022-05-24T03:27:37Z-
dc.date.available2022-05-24T03:27:37Z-
dc.date.issued2022-
dc.identifier.citationLau, E. M. J. E. (2022). Deployable S-band Antenna for CubeSats. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/157850en_US
dc.identifier.urihttps://hdl.handle.net/10356/157850-
dc.description.abstractCubeSats, otherwise known as Nanosatellites or Small Satellites, have been an increasing commodity in the modern world. Utilizing configurable onboard systems and hardware designs compacted to a fixed CubeSat size, these satellites are able to provide a wide range of services, from GPS tracking to the researching and monitoring of the Earth and its environment. As such, transmission of the collected data by these small satellites is crucial, especially when used for real-time services. As CubeSats are defined by their compact space and cost effectiveness, data transmission is generally transmitted through a compactable isotropic antenna. In the designs of these antennas, the conducting material folds into a small compartment in the satellite and unfurls itself from its compartment after the deployment of the satellite into open space. Although this method is sufficient in carrying transmission services, the employment of parabolic antennas has been explored in the past few years, as seen from the University of Southern California’s Aeneas satellite and NASA’s RainCube. These antennas compared to isotropic antennas provide a higher gain and narrow beamwidth, allowing for a stronger received signal strength, resulting in more reliable transmissions at faster speeds. However, to integrate these parabolic antenna designs of 1.5U, a larger volume of space is needed on the small satellite. This proposed design reduces the space needed for parabolic antennas, from 1.5U to 1U, allowing for a smaller satellite or a satellite capable of accommodating more systems and subsequently, reducing the cost of the satellite’s launch. Thus, this paper aims to explore a new design for onboard parabolic antennas, using origami methods to provide a cost efficient, low storage (1U) and high gain antenna.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationA1004-211en_US
dc.subjectEngineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radioen_US
dc.titleDeployable S-band Antenna for CubeSatsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorAmal Chandranen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineering (Information Engineering and Media)en_US
dc.contributor.researchSatellite Research Centreen_US
dc.contributor.supervisor2Kashyapa Bramha Naren Athreyasen_US
dc.contributor.supervisoremailkashyapa@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Elizabeth Lau FYP Final Report.pdf
  Restricted Access
2.65 MBAdobe PDFView/Open

Page view(s)

34
Updated on Aug 13, 2022

Download(s)

1
Updated on Aug 13, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.