Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/158131
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTan, Valerie Ying Jiaen_US
dc.date.accessioned2022-05-30T13:01:50Z-
dc.date.available2022-05-30T13:01:50Z-
dc.date.issued2022-
dc.identifier.citationTan, V. Y. J. (2022). Microstructure analysis of magnesium alloy and/or its nanocomposite under high strain rate testing. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/158131en_US
dc.identifier.urihttps://hdl.handle.net/10356/158131-
dc.description.abstractWith the rise in car ownership, consumption of resources and energy has increased considerably. This causes severe environmental pollution and to counter this problem, reducing exhaust emissions is required. Using lightweight and high-strength material helps to improve vehicles fuel efficiency and reduces the weight of the vehicle. With such properties, magnesium alloy has become an attractive material to use in the automobile and aerospace industry. The purpose of the project was to study the influence of strain rate on magnesium alloy as well as the microstructure of magnesium alloy. There are two specimens used, one having went through deformation at high strain rate by the Split Hopkinson Pressure Bar Compression Test at room temperature and the other being at its original state. By analysing the microstructure of the magnesium alloy, we will be able to determine whether magnesium alloys are beneficial for the several mentioned industries. Before studying the microstructure of the alloy, the alloy will go through the metallographic preparation process. The metallographic preparation process consists of mounting, grinding, polishing, and etching. The microstructure of the specimens was viewed using the Optical Microscope and the Scanning Electron Microscope. Lastly, the results obtained will be analysed and compared to other reliable sources to prove the results.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.subjectEngineering::Materials::Metallic materials::Alloysen_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleMicrostructure analysis of magnesium alloy and/or its nanocomposite under high strain rate testingen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorShu Dong Weien_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.supervisoremailMDSHU@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Tan Ying Jia Valerie_B181 FYP report.pdf
  Restricted Access
6.08 MBAdobe PDFView/Open

Page view(s)

23
Updated on Jan 29, 2023

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.