Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/159005
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAng, Yi Huien_US
dc.date.accessioned2022-06-09T01:08:46Z-
dc.date.available2022-06-09T01:08:46Z-
dc.date.issued2022-
dc.identifier.citationAng, Y. H. (2022). Preparation and characterization of polymers with branched architecture. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/159005en_US
dc.identifier.urihttps://hdl.handle.net/10356/159005-
dc.description.abstractPolymer binders make up the structural matrix of solid propellants. They play a role in determining the properties of the propellant. Currently, there are not many studies done on hyperbranched polyurethane (HBPU) for use as a polymer binder. In this project, HBPU synthesized through cationic ring-opening polymerization of 3-azidomethyl-3-hydroxylmethyl oxetane and cured with isocyanate was studied. This project aims to synthesize and characterize the mechanical properties of HBPU. The glass transition temperature, and thermal and viscoelastic properties of the material, were investigated. The results indicate that HB-TMP-GAP has a larger OB% as compared to that of BDO-GAP and shows a larger percentage of weight loss in TGA. This suggests that HB-TMP-GAP has better combustion capabilities than BDO-GAP. The addition of DBP plasticizer results in a decrease in elasticity of the HBPU. A decrease in the NCO/OH ratio and an increase in the weight percentage of plasticizer results in a decrease in the glass transition temperature of the HBPU. However, the Tg of the HBPU obtained from this project is too high for the application as a binder material.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.subjectEngineering::Materialsen_US
dc.titlePreparation and characterization of polymers with branched architectureen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorHng Huey Hoonen_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.description.degreeBachelor of Engineering (Materials Engineering)en_US
dc.contributor.supervisor2Sreekumar Pisharathen_US
dc.contributor.supervisoremailASHHHng@ntu.edu.sgen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MSE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Ang Yi Hui Final FYP Report.pdf
  Restricted Access
1.58 MBAdobe PDFView/Open

Page view(s)

86
Updated on Dec 11, 2023

Download(s) 50

22
Updated on Dec 11, 2023

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.