Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/159085
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNg, Zheng Haoen_US
dc.date.accessioned2022-06-09T08:48:22Z-
dc.date.available2022-06-09T08:48:22Z-
dc.date.issued2022-
dc.identifier.citationNg, Z. H. (2022). Composite fabrication using slip casting. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/159085en_US
dc.identifier.urihttps://hdl.handle.net/10356/159085-
dc.description.abstractA novel approach for producing periodically structured assemblies of dense ceramics was recently devised and implemented. This approach, known as magnetically assisted slip casting (MASC), allows for the manipulation of ceramic micro-platelets in a slurry using rotating magnets, resulting in the capacity to construct the required microstructure. The complex microstructures in natural ceramic composites contribute to convoluted fracture patterns, which contribute to their exceptional toughness. Current micro reinforced composites' microstructures have yet to achieve the same level of complexity, resulting in poorer qualities. To achieve a complex microstructure, MASC ceramic green bodies with step feature microstructure were fabricated to study the capabilities and limits of MASC-fabricated structures. The fabricated ceramic green bodies were infiltrated with a polymer matrix to simulate the biopolymeric mortar found in the nacre microstructure. A compression test was performed on samples with step features of varying sizes, and their mechanical performance was compared. The findings reveal that a sufficiently prominent step feature improves the stiffness of the material while retaining other mechanical characteristics such as strength, and ductility. This study is critical in understanding MASC's ability to produce composites with the complex microstructure present in natural ceramic composites and with comparable properties.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationA072en_US
dc.subjectEngineering::Materials::Composite materialsen_US
dc.titleComposite fabrication using slip castingen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorHortense Le Ferranden_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.supervisoremailHortense@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
A072 FYP Final Report AY21_22_U1922332L.pdf
  Restricted Access
2.31 MBAdobe PDFView/Open

Page view(s)

117
Updated on May 22, 2024

Download(s)

7
Updated on May 22, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.