Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/16104
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFoo, Jong Chien.-
dc.date.accessioned2009-05-21T03:29:34Z-
dc.date.available2009-05-21T03:29:34Z-
dc.date.copyright2009en_US
dc.date.issued2009-
dc.identifier.urihttp://hdl.handle.net/10356/16104-
dc.description.abstractIn this work, ultra-precision machining on aluminum alloys were carried out to investigate the surface quality using single point diamond tools (SPDT) cutters. Examined by SEM, the machined surfaces took on many defects such as microcracks, pits, voids or even scratches. It was found out that the cutting parameter such as feed rate and the usage of different workpiece materials had a significant effect on the surface quality when ultra-precision machining these aluminum alloys. The results showed that surface finish quality got worse with increasing feed rate or using a less hard material. The purpose of this study is to show that even if ultra-precision machining at low feed rate is carried out, there will still be defects which affect the surface finish quality. Investigation of chip formation would be carried out in this work for the study of the chip geometry. The results showed that the increase in the depth of cut would create thinner deformed chips. Comparison of the theoretical and experimental shape of the chip would also be made in this project. The decision of selecting a suitable machining parameter always depends on surface finish, part machinability and part geometry. An understanding of the results from SEM together with the relationship between machining parameter and surface finish can lead to improved control over the process, which is a vital consideration for ultra-precision machining.en_US
dc.format.extent80 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineering::Manufacturingen_US
dc.titleStudy of chip shape and surface finish in ultra-precision machiningen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorSathyan Subbiahen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
dc.contributor.researchPrecision Engineering and Nanotechnology Centreen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
m078.pdf
  Restricted Access
4.11 MBAdobe PDFView/Open

Page view(s) 50

493
Updated on Jul 19, 2024

Download(s)

11
Updated on Jul 19, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.