Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/161956
Title: Investigation of aqueous and organic co-solvents roles in fabricating seawater reverse osmosis membrane
Authors: Li, Can
Zhao, Yali
Lai, Gwo Sung
Wang, Rong
Keywords: Engineering::Environmental engineering
Issue Date: 2022
Source: Li, C., Zhao, Y., Lai, G. S. & Wang, R. (2022). Investigation of aqueous and organic co-solvents roles in fabricating seawater reverse osmosis membrane. Journal of Membrane Science, 645, 120187-. https://dx.doi.org/10.1016/j.memsci.2021.120187
Project: PUB-1801-0010
Journal: Journal of Membrane Science
Abstract: The addition of co-solvents in aqueous or organic phases of interfacial polymerization is a feasible strategy to tune the performance of aromatic polyamide (PA) thin-film composite (TFC) membrane for brackish water desalination, however, limited progress has been made in developing co-solvent-tailored seawater reverse osmosis (SWRO) membrane. Herein, SWRO membranes were prepared by adding various types of aqueous and organic co-solvents to reveal their impacts on the formation of the PA crumples. It was found that the aqueous/organic co-solvents affected the solubility parameter distance and interfacial tension between two immiscible phases, facilitating the diamine diffusion rate and resulting in a significant change in PA structure. The PA layer with modulated microstructure and varied surface features such as widened void structure, rougher surface, better wettability, and controlled cross-linking degree can be derived from the high interfacial instability that existed between the co-solvent and initial PA film due to the close mutual affinity. Besides, the additional polyvinyl alcohol coating layer atop the PA membrane successfully further enhanced the membrane selectivity. Overall, the mechanistic insights attained in this study revealed the relationship of diamine diffusion, physicochemical properties of PA layer and membrane separation performance for co-solvent-assisted membrane fabrication to render resultant SWRO membrane with more comparable permselectivity. The optimized TFC-SWRO membranes exhibited pure water permeability of 2.2 and 3.2 L m−2 h−1 bar−1 upon the assistance of aqueous and organic co-solvents, respectively, while maintaining excellent NaCl rejection of approximately 99% under seawater desalination tests.
URI: https://hdl.handle.net/10356/161956
ISSN: 0376-7388
DOI: 10.1016/j.memsci.2021.120187
Rights: © 2021 Elsevier B.V. All rights reserved.
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:CEE Journal Articles
NEWRI Journal Articles

SCOPUSTM   
Citations 50

6
Updated on Nov 21, 2022

Web of ScienceTM
Citations 50

2
Updated on Nov 19, 2022

Page view(s)

11
Updated on Nov 25, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.