Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/162556
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKong, Mengen_US
dc.date.accessioned2022-10-31T07:26:39Z-
dc.date.available2022-10-31T07:26:39Z-
dc.date.issued2022-
dc.identifier.citationKong, M. (2022). Numerical simulation of thermal processes in laser cladding of Al-50Si alloy on Al7075 surface. Master's thesis, Nanyang Technological University, Singapore. https://hdl.handle.net/10356/162556en_US
dc.identifier.urihttps://hdl.handle.net/10356/162556-
dc.description.abstractThe temperature field of laser cladding affects the stress field and microstructure of the formed part greatly, which directly determines the microstructure and mechanical properties of the formed part. However, it is very difficult to accurately measure and control the temperature of the laser melt pool and its surroundings in real time using the existing equipment. The development of numerical simulation provides a convenient and reliable method for the measurement of melt pool temperature. The numerical model established in this project will help the designers and process planners to have a better understanding of the complex cladding process and the influence of the several parameters involved. In actual industrial application, this will assist in developing optimal process planning solutions which was hard to get in usual methods. The laser cladding process of Al-50Si alloy on Al7075 surface was numerically simulated by ANSYS, considering the heat source model, latent heat of phase transition, surface effect element and so on. APDL command flow was selected to make the movement of heat source. Birth and death element method was used to simulate the formation of the cladding layer. The changing process of the temperature field during the entire laser processing process and the influence of the laser power on the maximum temperature were analyzed. Finally, the comparison between the simulation result and experimental result was carried out to verify the simulation.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.subjectEngineering::Mathematics and analysis::Simulationsen_US
dc.titleNumerical simulation of thermal processes in laser cladding of Al-50Si alloy on Al7075 surfaceen_US
dc.typeThesis-Master by Courseworken_US
dc.contributor.supervisorZhou Weien_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeMaster of Science (Smart Manufacturing)en_US
dc.contributor.supervisoremailMWZHOU@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Theses
Files in This Item:
File Description SizeFormat 
MSc Dissertation-Kong Meng.pdf
  Restricted Access
2.56 MBAdobe PDFView/Open

Page view(s)

131
Updated on Mar 1, 2024

Download(s)

8
Updated on Mar 1, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.