Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/163087
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJi, Zhenlinen_US
dc.date.accessioned2022-11-21T05:02:37Z-
dc.date.available2022-11-21T05:02:37Z-
dc.date.issued2022-
dc.identifier.citationJi, Z. (2022). Integrated production, material handling scheduling in flexible manufacturing system. Master's thesis, Nanyang Technological University, Singapore. https://hdl.handle.net/10356/163087en_US
dc.identifier.urihttps://hdl.handle.net/10356/163087-
dc.description.abstractFlexible manufacturing system is a dynamic and systematic process that converts raw materials or small components into finished products according to the customers’ various requirements. In this dissertation, a novel simulation-based system for real-time FMS control is presented. The framework is based on combining the real application systems and the simulation controlled by a DES (Discrete Event System) step execution tool. Simulation is an important part of system analysis which can be used to verify the correctness of the optimized controller. For the simulation part, we use Visual Components 3D simulation software to design a 3D simulation model of a mini production line. For the control part, the Automata Debugger tool is employed to send control commands. There is also a communication hub to transmit sensor data among the controller, simulation, and the real manufacturing system via OPC-UA protocol and TCP/IP protocol, and all the communication is carried out in a parallel way. The novelty of this dissertation is that once the signal of the hardware interface is set up, the production strategy can be changed easily and applied quickly without adjusting the components in the model, and the result of the simulation has proven its effectiveness. The potential benefits of this research are quite significant in the practical application that it can be connected to the real cyber-physical system, where efficient simulation and control techniques will have a direct impact on productivity and profitability.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationISM-DISS-02953en_US
dc.subjectEngineering::Electrical and electronic engineeringen_US
dc.titleIntegrated production, material handling scheduling in flexible manufacturing systemen_US
dc.typeThesis-Master by Courseworken_US
dc.contributor.supervisorSu Rongen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeMaster of Science (Power Engineering)en_US
dc.contributor.supervisoremailRSu@ntu.edu.sgen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:EEE Theses
Files in This Item:
File Description SizeFormat 
Ji, Zhen Lin. final.pdf
  Restricted Access
3.48 MBAdobe PDFView/Open

Page view(s)

44
Updated on Jan 31, 2023

Download(s)

4
Updated on Jan 31, 2023

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.