Please use this identifier to cite or link to this item:
|Title:||Fabrication of a rotary MR brake and data collection||Authors:||Sim, Desmond Huang De.||Keywords:||DRNTU::Engineering::Mechanical engineering::Mechanics and dynamics||Issue Date:||2009||Abstract:||This report involved the designing of Magneto-Rheological (MR) Drum Rotary Brake. Through research papers, there are two types of magneto-rheological rotary brake designs- disc and drum. However, it was found that MR drum rotary brake which consists of a thick rotor was less common and there were insufficient experimental data and design of MR Drum Rotary Brake available. In this report, a finalized design of MR drum rotary brake which consists of 3 main sub-assemblies of external housing comprising of inner housing, rotor, coil holder, bearings and radial shaft seals can therefore ensure to achieve at least 5Nm of torque in the presence of magnetic field. The dimensions of these components were determined with the support of Maxwell software programme that simulated the design of MR drum rotary brake under the influence of current. Through detailed calculation and selection of these components, the overall design aims to achieve the design requirements of maintaining the gap of 5mm and 0.5mm at the inner structure of the design and in additional, the ease of assembly and maintenance.||URI:||http://hdl.handle.net/10356/16395||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.