Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/163955
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLim, Jian Tiongen_US
dc.date.accessioned2022-12-27T05:38:37Z-
dc.date.available2022-12-27T05:38:37Z-
dc.date.issued2023-
dc.identifier.citationLim, J. T. (2023). Machine learning on fault diagnosis in wind turbine. Final Year Project (FYP), Nanyang Technological University, Singapore. https://hdl.handle.net/10356/163955en_US
dc.identifier.urihttps://hdl.handle.net/10356/163955-
dc.description.abstractWith the improvement of wind turbine (WT) operation and maintenance (O&M) technologies and the rise of O&M cost, the fault diagnostic in WT based on supervisory control and data acquisition (SCADA) system has become one of the cheapest and easiest method to detect early alarm of fault in WT. The O&M cost was 21% of the total cost of a wind turbine project. The replacement cost of the critical parts like gearbox is twice the replacement cost for generator or blade. Hence, it is necessary to monitor the change pattern of real time parameters from the WT and maintenance action could be taken in advanced before any major failures. Therefore, a SCADA-driven fault diagnosis in WT based on machine learning algorithm has been proposed in this study by comparing the performance of three different machine learning algorithms, namely k-nearest neighbours (kNN) with bagging regressor, extreme gradient boosting (XGBoost) and artificial neural network (ANN) on condition monitoring of gearbox oil sump temperature. Beside this, this study also compared the performance of two different features selections method, namely Pearson Correlation Coefficient (PCC) and Principle Component Analysis (PCA) and three hyperparameters optimization method on optimizing the performance of the models, namely grid search, random search and Bayesian Optimization. A set of 3 years SCADA data of WT located at France have been used to verify the selected method. The result showed the kNN with bagging regressor with PCA by applying grid search provide the best R2 score and the lowest root mean square error (RMSE). The trained model can detect the potential of WT faults at least 4 weeks in advanced. However, the proposed kNN model in this study was suggested to trained with Support Vector Machine hybrid algorithm to improve its performance and reduce fault alarm. ANN could also be enhanced by applying Bayesian Physics-Informed Neural Networks as this algorithm network is more compatible to the real world non-linear dynamic system like WT.en_US
dc.language.isoenen_US
dc.publisherNanyang Technological Universityen_US
dc.relationB448en_US
dc.subjectEngineering::Mechanical engineeringen_US
dc.titleMachine learning on fault diagnosis in wind turbineen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorNg Yin Kweeen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.supervisoremailMYKNG@ntu.edu.sgen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Machine Learning on Fault Diagnosis in Wind Turbine System - FYP Submission.pdf
  Restricted Access
1.79 MBAdobe PDFView/Open

Page view(s)

326
Updated on Apr 18, 2024

Download(s) 50

66
Updated on Apr 18, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.