Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/16661
Title: DC-modulated single stage power factor correction AC/AC converter
Authors: Chen, JianHong.
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Power electronics
Issue Date: 2009
Abstract: Traditional AC to AC converters are implemented using voltage regulation technique. However, this method contains several shortcomings like low power factor, high total harmonic distortion and distorted output waveform. In this report, power factor correction using DC to DC conversion technique is explored and implemented into AC to AC converters. Boost and Buck-Boost topologies are comprehensively explored. Power factor has effectively improved to near unity with minimal total harmonic distortion and high power transfer efficiency of up to 98%. Recommendations on using series LC filter to extract the switching harmonics and on using hysteresis current control to minimize phase shift due to load variations are also proposed. With future improvement on the DC-modulated AC to AC conversion technology, this technique is anticipated to replace the common thyristor-switched voltage controller and would be widely utilized in industrial applications.
URI: http://hdl.handle.net/10356/16661
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
EA1057-081.pdf
  Restricted Access
531.13 kBAdobe PDFView/Open

Page view(s) 50

263
checked on Sep 26, 2020

Download(s) 50

10
checked on Sep 26, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.