Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/17853
Title: Reliability evaluation of light emitting diode package
Authors: Lin, Junan.
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Electronic systems
Issue Date: 2009
Abstract: Light emitting diode (LED) offers high efficiency and energy saving alternative to current light solution. It is believed to have a longer lifespan and higher reliability than conventional incandescent and fluorescent lamps. In this project, the High Brightness White LED from Osram went through accelerated life testing. Under the accelerated environmental condition, namely, temperature and humidity cycling, degradation caused by these 2 factors need to be investigated. Prior to that, the preparation for reliability test had to be careful considered. One consideration was the junction temperature which would vary if self heating exited in the LED during operation. The optical result was sensitive to the junction temperature. In order to avoid this phenomenon, a method used to determine an optimized pulse setting has been found in this project. The Total luminous flux was taken to determine the time to degradation (TTD).Others parameter such as the Scotopic to Photopic flux(SP) ratio and the blue to yellow emission intensity ratio was computed as well. With all these data, a failure analysis could be conducted to determine the underlining failure mechanisms
URI: http://hdl.handle.net/10356/17853
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
EB2103-081.pdf
  Restricted Access
2.47 MBAdobe PDFView/Open

Page view(s)

223
Updated on Dec 5, 2020

Download(s)

6
Updated on Dec 5, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.