Please use this identifier to cite or link to this item:
|Title:||Development of a low profile and light weight UHF antenna||Authors:||Koh, Kelvin Wai Inn.||Keywords:||DRNTU::Engineering::Electrical and electronic engineering::Wireless communication systems
DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio
|Issue Date:||2009||Abstract:||With the vast applications of wireless technology, the demand for custom made antennas is high as we need to cater to each and every individual system requirements. This project mainly focuses on the design and development of novel antenna for commercial demands. The main objective of this project is to make the antenna lightweight, rigid and also low cost to fabricate. This report presents the design and development of a cavity-backed slot antenna using simulation software, High Frequency Simulator Software (HFSS). By the end of the project, this cavity-backed slot antenna is successfully designed, optimized and tested. Two cavity backed antenna will be constructed. The dimension and material are the same; the difference is the feeding network where one of them is using co-axial cable while the other is using strip line. Measurement results shows good matching with simulation and also all antenna specifications and requirements are met. Few designs of the housing of antenna are also constructed.||URI:||http://hdl.handle.net/10356/17917||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.