Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/18040
Title: Plastic injection mold creation based on heart valve mold model
Authors: Wong, Tsz Hin.
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2009
Abstract: This report presents the plastic injection mold creation process based on 3D computer models of heart valve mold. Plastic injection molding would present a cheaper alternative to rapid prototyping technologies adopted at the moment in the fabrication of heart valve molds. The SPAC valve mold (size 25) and the pulmonary conduit mold (Size 13) were used in this project. Of which, the SPAC valve mold (bottom) went through the entire mold fabrication process from designing to machining. The finished mold presents three defects: rigid fitting of the ejection part and the core insert; 0.8mm offset of the core insert which prevents proper closure of the mold; and indentions on the curve surfaces due to vibration suffered by the long neck cutter with thin cutting diameter.
URI: http://hdl.handle.net/10356/18040
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
m076.pdf
  Restricted Access
1.71 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.