Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/19975
Title: Velocity characteristics of coaxial nozzle flows with a central lobed mixer
Authors: Xu, Xiang Guo.
Keywords: DRNTU::Engineering::Mechanical engineering::Fluid mechanics
Issue Date: 1997
Abstract: Measurements have been conducted downstream of a two-dimensional lobed forced mixer in a wind tunnel and downstream of coaxial nozzles with and without a central three-dimensional lobed mixer in a water tunnel. In the wind tunnel experiment, a two-dimensional lobed mixer with six full lobes was tested at different velocity ratios. At each velocity ratio, four different thicknesses of initial boundary layer had been used. The velocity measurements were obtained at a Reynolds number of 2.27x10 (based on the nominal wavelength of the lobe at 33 mm and the mean speed of the two streams at 10 m/s) using a three-hole pressure probe. Results highlighted that large velocity ratios and thick initial boundary layers would normally lead to a faster decay rate for the streamwise vorticity downstream of the lobed mixer trailing edge.
URI: http://hdl.handle.net/10356/19975
Rights: NANYANG TECHNOLOGICAL UNIVERSITY
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Theses

Files in This Item:
File Description SizeFormat 
MAE_THESES_69.pdf
  Restricted Access
19.16 MBAdobe PDFView/Open

Page view(s) 50

299
checked on Sep 27, 2020

Download(s)

5
checked on Sep 27, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.