Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/20780
Title: Vibration modeling of hard disk drive components
Authors: Cheng, Tian.
Keywords: DRNTU::Engineering::Mechanical engineering::Mechanics and dynamics
Issue Date: 2009
Abstract: In this project, modal analysis was conducted to characterize the actuator in terms of dynamics performance. In a typical hard disk drive, the actuator is widely used to read and write data on the platter. Since the actuator has the read/write heads on its tip of very end, and the distance between platter surface and slider head is too narrow, thus it is very important to know at which frequency the actuator will start to sway off the track duo to its vibration during whole system in operation. Actually, position accuracy of actuator head can be control by the servo bandwidth. Higher servo bandwidth will enhance the position accuracy of actuator head. However, servo bandwidth is limit by the resonant frequency of actuator. Vibration modeling of hard disk drives components (actuator assembly) is this project title, the emphasis of this project is focus on increasing the natural frequency of ‘Butterfly mode”, which is one kind of actuator head shape deformation caused track damage. Thereby, the servo bandwidth can reach higher level. And also, the position accuracy of actuator head can be improved in same time.
URI: http://hdl.handle.net/10356/20780
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
MP-B018.pdf
  Restricted Access
4.79 MBAdobe PDFView/Open

Page view(s) 50

292
checked on Oct 26, 2020

Download(s) 50

12
checked on Oct 26, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.