Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/20803
Title: Investigation into the polishing of brass using flap and fibre grinding disc
Authors: Sum, Kar Woh.
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2010
Abstract: In this project, the grinding disc will be mounted on the vertical spindle of a 3 axis Computer Numerical Control (CNC) milling machine, with brass mounted at an incline angle. The aim of this project is to evaluate the performance of both flap and fibre discs and results are based on the polished brass surface roughness (Ra), normal force measured and material removal rate (MRR). The experiment set up will follow closely to how an operator performs his polishing process. Unfortunately, there is no available research or technical literature on the selected grinding disc’s performance and disc selection was based on information provided in the catalogue.
URI: http://hdl.handle.net/10356/20803
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
SUM KAR WOH.pdf
  Restricted Access
3.15 MBAdobe PDFView/Open

Page view(s) 50

252
checked on Sep 23, 2020

Download(s) 50

12
checked on Sep 23, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.