dc.contributor.authorTan, Soo Chiangen_US
dc.date.accessioned2008-09-17T09:29:06Z
dc.date.accessioned2017-07-23T08:30:54Z
dc.date.available2008-09-17T09:29:06Z
dc.date.available2017-07-23T08:30:54Z
dc.date.copyright2006en_US
dc.date.issued2006
dc.identifier.citationTan, S. C. (2006). Design of liquid-crystal-on-silicon and organic light-emitting device microdisplays. Master’s thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/3389
dc.description.abstractBuilding display on silicon has been explored for its advantages of low power, high resolution and low cost of manufacturing. Using silicon allows complex and high-density circuits to be build on the same substrate as the display itself, eliminating off-chip interconnects to realize a Display-on-Chip (DOC). In addition, dense layout rules of CMOS processes allow pixels to be placed very close together. Regardless of reflective (Liquid-Crystal-on-Silicon (LCoS)) or emissive (organic light-emitting device (OLED)) displays, the aperture ratio typically of greater than 90% is attainable for most CMOS processes.en_US
dc.rightsNanyang Technological Universityen_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Optics, optoelectronics, photonics
dc.titleDesign of liquid-crystal-on-silicon and organic light-emitting device microdisplaysen_US
dc.typeThesisen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.contributor.supervisorSun, Xiaoweien_US
dc.description.degreeMASTER OF ENGINEERING (EEE)en_US


Files in this item

FilesSizeFormatView
EEE-THESES_1256.pdf18.12Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record