dc.contributor.authorChen, Junyong.en_US
dc.date.accessioned2010-04-23T02:29:44Z
dc.date.accessioned2017-07-23T08:39:39Z
dc.date.available2010-04-23T02:29:44Z
dc.date.available2017-07-23T08:39:39Z
dc.date.copyright2007en_US
dc.date.issued2007
dc.identifier.citationChen, J. (2007). Development of collaborative design environment with heterogeneous CAD system. Master’s thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/36130
dc.description156 p.en_US
dc.description.abstractTraditional CAD (Computer-Aided Design) technologies focused on the interactive process between a computer and a single user. This shortcoming greatly constrains distributed collaboration. Collaborative CAD systems have been proposed to facilitate resolution in team design and have gained increasing attention and are considered as the next generation CAD solutions. Ideally, such a collaborative CAD system allows a group of designers, often geographically dispersed, to work seamlessly with one another over a distributed network during a real-time design process. Most of previous research efforts in this area concentrated on incorporating network functions into a typical CAD system in order to enable the mechanisms of collaborative design. The problem is that these research efforts are developed on a specific CAD system, thus restricted.en_US
dc.subjectDRNTU::Engineering::Manufacturing::CAD/CAM systems
dc.titleDevelopment of collaborative design environment with heterogeneous CAD system.en_US
dc.typeThesisen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.contributor.supervisorAu Chi Kiten_US
dc.description.degreeMASTER OF ENGINEERING (MAE)en_US


Files in this item

FilesSizeFormatView
MAE_THESES_86.pdf19.48Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record