Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/36160
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLiew, Li Ting.-
dc.date.accessioned2010-04-23T02:43:00Z-
dc.date.available2010-04-23T02:43:00Z-
dc.date.copyright2010en_US
dc.date.issued2010-
dc.identifier.urihttp://hdl.handle.net/10356/36160-
dc.description.abstractOne of the biggest challenges in a 10 Tb/in2 recording is the impossible reduction of the current sensor thickness to meet the linear resolution requirement, even with today’s technology. Current tunnel magnetoresistance (TMR) read head has reached its limit due to its high product of resistance and area (RA) and the shield to shield spacing (SSS) in current perpendicular-to-plane giant magnetoresistance (CPP-GMR) read head remains a bottle neck issue to achieve a high data recording. Therefore, differential dual spin valve (DDSV) is proposed to alleviate this problem, assuming that GMR ratio is not an issue. Experiments using the four probe station were executed to understand the fundamental issues associated with the DDSV structures. Hard bias was also included in the experiment to mimic the real bias field in the read sensor. The selection of the permanent magnets was depended on the simulation results via MATLAB. The samples presented in the report are classified into two groups according to the thickness differences in the spacer and gap layers. In the first group of samples, the effect of the interlayer ferromagnetic coupling effect associated with the spacer layer can be explained using the Ruderman-Kittel-Kasuya-Yosida (RKKY) and orange peel effects. Anti-ferromagnetic coupling (AFC) can be observed in the next group of samples. There is a distinct trade-off between sensitivity as well as GMR ratio when a certain thickness of the gap/spacer layer is chosen. When sensitivity of the sample is low, it will result in a high GMR ratio and vice versa.en_US
dc.format.extent56 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineering::Materials::Microelectronics and semiconductor materialsen_US
dc.titleCharacterization of read sensors in hard disk drivesen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorGan Chee Lipen_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.description.degreeBachelor of Engineering (Materials Engineering)en_US
dc.contributor.organizationA*STAR Data Storage Instituteen_US
dc.contributor.supervisor2Han Guchangen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MSE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
MSE09-070.pdf
  Restricted Access
1.91 MBAdobe PDFView/Open

Page view(s)

228
Updated on Nov 30, 2020

Download(s) 10

5
Updated on Nov 30, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.