Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/36190
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTan, Kee Sing.-
dc.date.accessioned2010-04-23T06:03:32Z-
dc.date.available2010-04-23T06:03:32Z-
dc.date.copyright2010en_US
dc.date.issued2010-
dc.identifier.urihttp://hdl.handle.net/10356/36190-
dc.description.abstractThe potential of using ferroelectric materials in applications such as sensors, transducers and micro-actuators has always been an area of intense research. In light of the increase in public awareness of the adverse effect of prolonged UV exposure, there is a need for the development of a low cost UV detector. Conventional semiconductor based UV detectors either requires expensive processing techniques or are sensitive to wavelengths in the visible region. Thus, an alternative method to realize UV detection is through the utilization of the photovoltaic property of ferroelectric thin film PLZT due to its corresponding bandgap around UV wavelengths. Conventionally a sandwiched configuration is often used, thus the opaque top electrode inevitably prevents a portion of light from reaching the active layer. Interdigital configuration on PLZT thin films is thus employed due to its potential in generating large voltage signal and minimal energy loss from direct exposure to sunlight. In this work, various aspects such as the material constant, photovoltaic response and its conversion efficiency are investigated. In addition, the effects of varying temperature and humidity on the performance of the device are studied. A UV detector prototype developed by IMRE was tested under both laboratory and outdoor conditions. This report successfully demonstrated that UV sensing capability can be realized through the photovoltaic response of ferroelectric ceramic thin films. Looking forward, the results will contribute to development and optimization of the UV detector for future research.en_US
dc.format.extent42 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineeringen_US
dc.titlePhotovoltaic properties of ferroelectric ceramic thin filmsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorYao Kuien_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.description.degreeBachelor of Engineering (Materials Engineering)en_US
dc.contributor.organizationA*STAR, Institute of Materials Research and Engineering (IMRE)en_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MSE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
MSE09-160.pdf
  Restricted Access
594.75 kBAdobe PDFView/Open

Page view(s) 50

327
Updated on Dec 3, 2020

Download(s) 50

7
Updated on Dec 3, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.