Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTan, Kevin Kaiwen.-
dc.description.abstractThis report presents the details of the projects, including the design considerations, the design processes by simulation, the optimization by impedance measurement, the antenna configuration and result comparisons, as well as the conclusion. The main objective of this project is to design an ultra high frequency (UHF) RFID tag antenna with omni-directional radiation patters in the azimuth plane. The antenna was simulated with the aid of IE3D software. An RFID tag was prototyped using the antenna and a microchip. The tag performance was validated in free space first, very good omni-directivity was observed in azimuth plane. The RFID tag prototype was then attached to a Sushi plate; it was found that the plastic Sushi plate shows sever effect on the tag performance. By co-design the tag antenna with the plastic Sushi plate, the tag performance is observed to be much enhanced.en_US
dc.format.extent60 p.en_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radioen_US
dc.titleA UHF omni-directional RFID tag antennaen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorZhu Leien_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
dc.contributor.organizationA*STAR Institute for Infocomm Researchen_US
dc.contributor.supervisor2Qing Xianmingen_US
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
  Restricted Access
2.14 MBAdobe PDFView/Open

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.