Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/40212
Title: Dynamic analysis of ultrasonic vibration assistant machining system
Authors: Chua, Danny Han Kwang.
Keywords: DRNTU::Engineering
Issue Date: 2010
Abstract: Vibration assisted machining has been proven many times for its capability to improve fabrication processes. In the conventional use of vibration assisted machining, vibratory motion is more often applied to the cutting tool in processes such as turning where the cutting speed is much lower than the vibration speed in order to obtain intermittent cutting. In contrast, this study investigates vibration assistance that is applied to the workpiece in a milling system where the cutting speed is much higher than the vibration speed. The vibratory cutting edge motion in such a milling system is expected to reduce the cusp error resulted from peripheral milling. To verify this, a one-directional ultrasonic vibration assisted milling system is designed and its machining dynamics is investigated in terms of its modal structure and machined surface quality. A modal analysis is first performed on the milling system to obtain its natural frequencies and other modal parameters. Machining tests are then performed with different machining conditions of spindle speed, feed rate and depth of cut to further understand the mechanism of ultrasonic vibration assistance for surface roughness generation. In general, an improvement in surface roughness is observed with an increase in feed per tooth in both feed directional and cross feed directional ultrasonic vibration assisted milling. Some explanations are offered to support these results at the end of this study.
URI: http://hdl.handle.net/10356/40212
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
MB498.pdf
  Restricted Access
2.07 MBAdobe PDFView/Open

Page view(s) 50

351
checked on Oct 28, 2020

Download(s) 50

8
checked on Oct 28, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.