Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMuhammad Shahid Shith.
dc.description.abstractThe aim of this project is to simulate the effects of carbide concentration on crack propagation in tool steel. This is carried out by using properties of AISI M2 as a reference tool steel material and ABAQUS/Standard 6.9 to run simulations. The project is segmented into four different phases. The first phase consisted of modeling a global model of the predetermined microforming die. This included the loading and boundary conditions applied on the global model. In the second phase, displacement data of high stressed portion of the die is used to drive a submodel. The submodel is iterated twice to achieve a unit cell dimension of 0.01mm2 with highest stress concentration. Carbide concentrations of 10, 60 and 600 particles per mm2 with variations in orientation and distribution are configured to form 12 different cases in the third phase of the project. Simulations are run on the 12 cases and 3 critical cases which recorded the highest principle strain readings are chosen. The fourth phase used the critical cases to drive 3 crack models. XFEM is used to simulate the crack propagation. Initial crack of 0.5μm is modeled in each case with a direction perpendicular to maximum in-plane principle strain tensors at the carbide corner with the highest maximum principle strain value and into the matrix. From the results, it is observed that carbide particle size in the range of larger than 8μm give a single crack propagation direction from an initial crack. This is more critical than possible branching cracks in smaller particle size. Range of sizes smaller than 3μm provide best delay in crack initiation. Also, concentration has insignificant effects on crack initiation for this range of carbide particle sizes.en_US
dc.format.extent66 p.en_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Mechanical engineeringen_US
dc.subjectDRNTU::Engineering::Mathematics and analysis::Simulationsen_US
dc.titleA study of crack propagation in microforming toolsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
dc.contributor.supervisor2Sylvie Castagneen_US
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
  Restricted Access
2.6 MBAdobe PDFView/Open

Page view(s)

checked on Oct 24, 2020


checked on Oct 24, 2020

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.