Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/40864
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRaghul, Suthagar
dc.date.accessioned2010-06-23T02:47:07Z
dc.date.available2010-06-23T02:47:07Z
dc.date.copyright2010en_US
dc.date.issued2010
dc.identifier.urihttp://hdl.handle.net/10356/40864
dc.description.abstractThe objective of this report is to summarize the experience and knowledge gained during the development of the final year project, “A6084-091-Study of Semiconductor nanowires embedded in organic matrix”. The project focussed on experiments conducted using Silicon Nanowires (SiNWs) dispersed in organic polymers which were then spin-coated over substrates such as Si-Wafer and glass to form SiNWs/polymer thin films. The rationale behind using SiNWs for this purpose was that incorporating inorganic SiNWs into an organic polymer was expected to have a potential as a hybrid solar cell device. Further, different types of polymers were used for the thin films namely PMMA, PEG and P4VP. The SiNWs were fabricated using a top-down approach namely the electroless chemical etching process as it is ideal to fabricate large area SiNW arrays with low cost, low synthesis temperature and the simplicity of the process being other advantages of the process. A total of 9 different samples were prepared using different SiNWs/Polymer thin film combination. The Samples were then undergone through SEM imaging in order to analyze the extent of dispersion in the respective polymers and the general surface feature of the samples. The SiNWs were found to be dispersed most efficiently in the polymer P4VP. Furthermore, the electrical characterization of the samples was performed by carrying out their I-V measurements and analyzing any scope of potential photo-electric effects. After analyzing all the results it was inferred that the SiNWs/PMMA thin film over n-Si (5 Ω-cm) was the closest sample meeting the objectives of the experiment. The SiNWs/P4VP thin film over ITO patterned glass also showed promising results and future modification in fabricating the device could lead to favourable results on that end too. At the end of the project report, several recommendations for future work have been mentioned which primarily include greater research with SINWs and specific polymers P4VP and PMMA.en_US
dc.format.extent89 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Nanoelectronicsen_US
dc.titleStudy of semiconductor nanowires embedded in organic matrixen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorRuslien_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
EA6084-091.pdf
  Restricted Access
5.47 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.