Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/41583
Title: A micromachined condenser microphone with SU-8 back plate
Authors: Tan, Zhengyi.
Keywords: DRNTU::Engineering::Mechanical engineering::Mechatronics
Issue Date: 2010
Abstract: The advancement of silicon micromachining technology has increased the commercial production potential of silicon condenser microphones. Possessing low noise and high sensitivity, silicon condenser microphones can be used in a wide range of fields like mobile communications and in hearing devices. This report presents the fabrication process of a micromachined silicon condenser microphone with SU-8 backplate using the single wafer technique. Using the stable polymer SU-8, these microphones and can be manufactured in large quantities at a relatively low cost. In previous fabrication attempts, the aluminium sacrificial layer was not etched completely due to the poor penetration of the aluminium etchant. Additional obstacles included the peeling of the electrode layer and the non-optimization of the SU-8 exposure.
URI: http://hdl.handle.net/10356/41583
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
tanz0028.pdf
  Restricted Access
8.34 MBAdobe PDFView/Open

Page view(s) 5

264
checked on Oct 25, 2020

Download(s) 5

7
checked on Oct 25, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.