Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/41766
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMark, Chee Kongen
dc.date.accessioned2010-08-11T07:51:23Zen
dc.date.available2010-08-11T07:51:23Zen
dc.date.copyright2008en
dc.date.issued2008en
dc.identifier.citationMark, C. K. (2008). Micromechanisms of failures in ultralight magnesium alloys. Master’s thesis, Nanyang Technological University, Singapore.en
dc.identifier.urihttps://hdl.handle.net/10356/41766en
dc.description.abstractFailure is always a potential problem to engineers whenever materials are used. Much effort has been directed towards the development of satisfactory fracture criteria to enable structural engineers to design confidently against such possible failures. However, so far understanding of failures in many materials is quite poor, although considerable knowledge has been obtained on failure mechanisms of steels. The project, therefore, aimed to gain better understanding of deformation and fracture processes in those engineering materials whose fracture mechanisms are poorly understood. Two ultralight magnesium alloys AZ91D and AMSOA were chosen for the study due to their importance to engineering applications. In this project, a technique was developed to combine the capabilities of optical microscope or SEM and mechanical testing device. A microtensile tester was installed under the optical microscope or inside an SEM to make it possible to carry out in-situ observation of deformation and fkacture processes when the tensile test is going on. The testing results for notched specimens of AZ91D magnesium alloy with different notch angles show that the smaller the notch angle, the higher the fracture stress level. This is quite unexpected, but the phenomenon observed can be explained in terms of sampling process. Small notch angle leads to localized plastic deformation zone and therefore makes it less likely to "sample" large defects in the magnesium alloy.en
dc.format.extent210 p.en
dc.language.isoenen
dc.subjectDRNTU::Engineering::Materials::Metallic materials::Alloysen
dc.titleMicromechanisms of failures in ultralight magnesium alloysen
dc.typeThesisen
dc.contributor.supervisorZhou Weien
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.description.degreeMASTER OF ENGINEERING (MAE)en
dc.identifier.doi10.32657/10356/41766en
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Theses
Files in This Item:
File Description SizeFormat 
MarkCheeKong08.pdf19.33 MBAdobe PDFThumbnail
View/Open

Page view(s) 20

435
Updated on Jul 28, 2021

Download(s) 20

167
Updated on Jul 28, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.