Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/42416
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTan, Yi Ling.-
dc.date.accessioned2010-11-30T07:18:38Z-
dc.date.available2010-11-30T07:18:38Z-
dc.date.copyright2009en_US
dc.date.issued2009-
dc.identifier.urihttp://hdl.handle.net/10356/42416-
dc.description.abstractThis report is presented to Nanyang Technological University as partial fulfillment of the requirements for Industrial Attachment. The report describes the knowledge and skills learnt by the student and also sewed as a proper documentation of the project that she was involved during the period of her Industrial Attachment with Institute of Chemical and Engineering Sciences (ICES) [refer to Appendix A and B]. Antibiotic X (AX) has been widely used in the treatment of osteomyelitis, which is infection of bone tissue. It must be administered at high concentration for prolonged time at infection site in order for healing process to begin. However, one major issue encountered by doctors in treating osteomyelitis is the low elution rate of AX from bone cement. In addition, low AX release rate also poses a risk of induction of antibiotic resistance when insufficient doses are administered on site. The research aims to improve elution of AX from commercial acrylic bone cement (Simplex, Cook and Smartset) with addition of our synthesized nanostructured materials (hydroxyapatite nanorods, alumina nanofibers and carbon nanotubes) without compromising on its mechanical properties. For this purpose, samples with varying amount of nanostructured materials and AX were prepared using either hand mixing or impregnation method. In vitro release studies were performed by soaking samples in phosphate buffered saline (PBS) solution at pH 7.4 and 37ºC for 60 days. The PBS was replaced every 24 hours and samples containing released AX concentration were investigated using spectrophotometric technique with o-phthaldialdehyde as derivatizing reagent. Outcomes of release kinetics were compared to commercial antibiotic loaded cement of controlled sample which did not contain nanostructured materials. The release profiles of all bone cement samples showed a fast release during the first week, diminishing progressively until the end of the study.en_US
dc.format.extent90 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineering::Bioengineeringen_US
dc.titleLoading of antibiotics nanostructured materials and investigating the controlled in vitro release rate from bone cementen_US
dc.typeIndustrial Attachment (IA)en_US
dc.contributor.schoolSchool of Chemical and Biomedical Engineeringen_US
dc.contributor.organizationA*STAR Institute of Chemical and Engineering Sciencesen_US
dc.contributor.supervisor2Kim Donghwanen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:SCBE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
BIE_Tan Yi Ling.pdf
  Restricted Access
2.95 MBAdobe PDFView/Open

Page view(s) 1

351
checked on Oct 31, 2020

Download(s) 1

48
checked on Oct 31, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.