Please use this identifier to cite or link to this item:
|Title:||Realization of DC electronic loads for energy storage testing||Authors:||Ong, Teng Ho.||Keywords:||DRNTU::Engineering::Electrical and electronic engineering::Power electronics||Issue Date:||2010||Abstract:||Almost all modern electronic and electrical devices are built in with power supply. The increasing researches on energy storage systems brings along the need for better and more efficient test equipments. A DC electronic load is one such system that is capable of testing all sorts DC output power supplies. The cost of DC electronic load is often too high and thus unaffordable to hold many sets. In institutions and schools where large amount of researches are carried out, the need for multiple sets of DC electronic load is often a challenge. Furthermore, conventional power supplies testing often result in large amount of energy losses due to the dissipation of heat. Thus a grid tie DC electronic load will solve this drawback. In this project, the control structure of DC electronic load will be discussed as an initial stage to realize the DC electronic load. The DC electronic load will be implemented by various popular power electronic modules and common control schemes for the ease of realization.||URI:||http://hdl.handle.net/10356/42814||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.