dc.contributor.authorToh, Yue Khing
dc.date.accessioned2011-04-18T03:29:54Z
dc.date.accessioned2017-07-23T08:33:26Z
dc.date.available2011-04-18T03:29:54Z
dc.date.available2017-07-23T08:33:26Z
dc.date.copyright2008en_US
dc.date.issued2008
dc.identifier.citationToh, Y. K. (2008). Development of a wireless sensor network system for target tracking and surveillance. Master’s thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/43658
dc.description.abstractIn most Wireless Sensor Network (WSN) target tracking systems in existence today, a significant number of low power sensor nodes are required to detect and to track the target. In many cases, a centralized architecture is employed in which the sensor nodes will send the information they have collected to a more powerful fusion centre which wll in turn compute the estimated target trajectory. In the real world, centralized tracking in a large-scale WSN may not be feasible due to the possible failure of the fusion centre and the large communication delay in forwarding the measurement data to the fusion centre. Distributed target tracking techniques can be employed by tasking sensor nodes near to the target to perform sensing, target state estimation and selection of future tasking sensor nodes. In this thesis, the development of a prototype wireless sensor network test bed to demonstrate distributed target tracking using the Extended Kalman Filter (EKF) algorithm is discussed. In our approach, each sensor node is equipped with an active ultrasonic array for range finding and collaboration between the sensor nodes to accurately track a moving target. When a target is within the sensing range, a tasking sensor is elected to perform the task of tracking, target state estimation, sensor selection and data reporting of the target trajectory to the base station for visualization. Since all the computational tasks are performed by the sensor nodes, the need for a powerful fusion centre is effectively eliminated. Efficient ways of implementing the EKF and sensor selection scheme into these sensor nodes are also presented in this thesis. Problems arising from the limitations of a typical WSN such as limiting processing capability are investigated and ways to overcome these limitations are also discussed. As each sensor node has limited computation resources, the WSN is unable to accurately track the target due to the complexity of calculations in the EKF algorithm.en_US
dc.format.extent108 p.en_US
dc.language.isoenen_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Wireless communication systemsen_US
dc.titleDevelopment of a wireless sensor network system for target tracking and surveillanceen_US
dc.typeThesis
dc.contributor.supervisor2Xiao Wendongen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.contributor.supervisorXie Lihuaen_US
dc.description.degreeMASTER OF ENGINEERING (EEE)en_US


Files in this item

FilesSizeFormatView
TohYueKhing08_A.pdf22.83Mbapplication/pdfView/Open
TohYueKhing08_B.pdf27.55Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record