Please use this identifier to cite or link to this item:
|Title:||Hardware development of DSP - based shunt active filters||Authors:||Su, Jingpo.||Keywords:||DRNTU::Engineering::Electrical and electronic engineering::Computer hardware, software and systems||Issue Date:||2011||Abstract:||Power quality problems have great adverse economical impact on the utilities and customers. Current harmonics are one of the most common power quality problems which traditional passive filters are unable to resolve. Current harmonics are primarily produced when non-linear loads are connected to point of common coupling (PCC). The adverse effect can caused forms of voltage and current distortions that damage the equipments that is connected to the same PCC or shorten the life span of supply source. Nowadays, modern active filters such as the shunt active filter are used to compensate these current harmonic problems. In this report, the background phenomena and literature review on power quality problems and solutions are discussed. The key focus of this project is the hardware design and implementation for single phase shunt active filter. Controller is also introduced to demonstrate the extraction of the fundamental and harmonic components from source current using the fast fourier transformer (FFT) theory. The controller is developed using MATLAB Simulink and tested and integrated with the hardware prototype of the shunt active filter.||URI:||http://hdl.handle.net/10356/45017||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.