Please use this identifier to cite or link to this item:
|Title:||Solar-wind street lighting||Authors:||Soh, Tian Lai.||Keywords:||DRNTU::Engineering::Electrical and electronic engineering::Power electronics||Issue Date:||2011||Abstract:||Feasibility study and hardware implementation on the hybrid solar wind street lighting system using renewable energy resources, solar energy and wind power, together with high brightness light emitting diodes (HB-LED) module as light source power street lights in an urban environment such as Singapore as well as remote or rural areas. The design of HB-LED Driver with two level of brightness control was studied and implemented in this project. A DC/DC Buck Converter with continuous output current was proposed to step-down the voltage from the battery source to different level of voltages for the HB-LED module. An Analog switch with low on-resistance was also proposed to integrate with the DC/DC Buck Converter for the switching of different voltages level. The HB-LED driver testing results were presented. The design of the prototype hybrid street lighting system was based on the components or parts such as Photovoltaic Panels, Wind Turbine, Permanent Magnet Generator, Batteries available in the laboratory. Environmental conditions such as wind speed and solar radiation level were monitored using the wind speed sensor and solar radiation sensor available in the laboratory. Data were collected and presented.||URI:||http://hdl.handle.net/10356/45034||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.