Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/45333
Title: Design and develop a device - jump robot
Authors: Chew, Ernest Yue Hao.
Keywords: DRNTU::Engineering::Mechanical engineering::Robots
Issue Date: 2011
Abstract: For this project “Design and Develop a Device”, the author decided on taking up the task to create a device that could jump. The primary objective was to build a prototype that could vertically jump as high as possible. Towards the end of the course of the project, the author explored the possibilities of the prototype performing a diagonal jump for application purposes. The author began the project by studying the prototypes completed by his predecessors and identified some of the underlying reasons why the results were not desirable. By avoiding similar mistakes, the first prototype built by the author managed to achieve a jump height of above 4 cm. The prototype relied on a battery powered motor to load a spring which provides the energy for the piston to strike the ground for the jump. Through several sets of improvements, which included weight reduction, increasing the spring force and improving on the consistency of the prototype in performing its jump, the prototype managed to achieve a final jump height of 8cm.
URI: http://hdl.handle.net/10356/45333
Schools: School of Mechanical and Aerospace Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
M144.pdf
  Restricted Access
2.54 MBAdobe PDFView/Open

Page view(s)

414
Updated on Jun 14, 2024

Download(s)

10
Updated on Jun 14, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.