Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/46223
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAlexander John Potter
dc.date.accessioned2011-07-08T01:13:28Z
dc.date.available2011-07-08T01:13:28Z
dc.date.copyright2011en_US
dc.date.issued2011
dc.identifier.urihttp://hdl.handle.net/10356/46223
dc.description.abstractThis report compiles all the works done by the author in relation to his Final Year Project choice as part of the course requirements of the School of Electrical & Electronic Engineering at Nanyang Technological University, and covers one main project. In the main project, a CdSe Quantum Dot Solar Cell was fabricated onto pieces of conducting glass and the photocurrent characterised, with attempts to compare differences generated by changes in the fabrication process. Initial testing on the first batch produced expected characterisation curves, albeit with low output levels, but later batches fabricated proved too unstable to be characterised, due to cracks occurring across the cell surface layer, increasing area resistance to the point of rendering the cells unusable. This later occurred with the first batch produced, and was assumed to occur due to a lack of adhesive substance. Due to time constraints no such chemical could be procured in time, so an electrolyte consisting of a Sulphur, Sodium Sulphide and Potassium Chloride dissolved in a methanol/deionised water solution was applied to the surface and then sandwiched with a second piece of conduction glass acting as a counter electrode. Measurements taken using a multimeter showed a clear difference in the voltage generation of the cell in non-sun conditions (~3mV) and when exposed to sunlight (~30mV). However, characterisation of the cell proved unsuccessful, due to issues with the size and shape of the cell and methods used to sandwich the two pieces of conducting glass together.en_US
dc.format.extent49 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Power electronicsen_US
dc.titleDevelopment of quantum dot solar cells for clean energyen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
dc.contributor.supervisor2Yong Ken Tyeen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
eA6156-101.pdf
  Restricted Access
1.69 MBAdobe PDFView/Open

Page view(s) 50

474
Updated on Jul 22, 2024

Download(s)

14
Updated on Jul 22, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.