Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/47123
Title: Correlation of vibration signatures with flank wear in ball nose end milling of inconel 718
Authors: Sudhanraj Gopikrishnan.
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2010
Abstract: In the indirect measurement of tool wear, typically, representatives of tool wear called features from force and vibration signals are analyzed. Most research works use the cutting force signal, measured by dynamometer, as a clear representative of tool wear. The size of the dynamometer (170x100x60 mm) and the cost ($50000) makes advantageous to replace the dynamometer by an accelerometer, which is 20 mm in height and 20 mm in diameter and costs around $1500. Thus, it is necessary to prove the correlation of vibration signatures with that of flank wear of ball nose cutter in end-milling Inconel 718.
Description: 73 p.
URI: http://hdl.handle.net/10356/47123
Schools: School of Mechanical and Aerospace Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Theses

Files in This Item:
File Description SizeFormat 
MAE_THESES_142.pdf
  Restricted Access
6.52 MBAdobe PDFView/Open

Page view(s)

397
Updated on Jun 24, 2024

Download(s)

12
Updated on Jun 24, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.