Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/47274
Title: An approach to electrical discharge alloying using powder suspended dielectric in micro-electrical discharge machining
Authors: Arumugam Sasidhara Pradeesh.
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2010
Abstract: Electrical discharge machining (EDM) has been widely used for removal process for the production of parts and dies. Over several decades, surface modification and accretion by Electrical Discharge Machining has been studied. The advantage of depositing material by EDM over other techniques, such as physical and chemical vapour deposition, is the ability to perform deposition during actual machining operation. This type of combined mode of machining and depositing material is commonly known as Electrical Discharge Alloying (EDA). Electrical Discharge Alloying provides specific material properties to the machined or unmachined surface based on the alloying material.
Description: 73 p.
URI: http://hdl.handle.net/10356/47274
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Theses

Files in This Item:
File Description SizeFormat 
MAE_THESES_9.pdf
  Restricted Access
8.63 MBAdobe PDFView/Open

Page view(s) 20

452
checked on Oct 21, 2020

Download(s) 20

10
checked on Oct 21, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.