Please use this identifier to cite or link to this item:
Title: Controller design for permanent magnet synchronous generator - wind turbine
Authors: Saw, Stephen.
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Control and instrumentation::Control engineering
Issue Date: 2011
Abstract: The generation of electrical power from wind farms is developing rapidly with the worldwide installed capacity. Being a promising alternative energy source nowadays, the technology for wind energy systems have gained popular. And because of the increasing wind power penetration, the improvements of the control strategies become a new challenge in order to extract maximum power from the wind. The implemented technology for extracting maximum power from the wind is needed to supply enough to the grid. This paper focuses on the control of the generator side converter which led fully control of the rotor speed of the generator. Field orientation control (FOC) control strategy is used to achieve Maximum Power Point Tracking (MPPT). These model are implemented and performed with the aid of MATLAB/Simulink to observe the simulation results. The controller need for the speed controller and current controller are tested here with Fuzzy Logic Controller and PI controller the results are compared.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
  Restricted Access
final report2.75 MBAdobe PDFView/Open

Page view(s) 50

checked on Oct 21, 2020

Download(s) 50

checked on Oct 21, 2020

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.