Please use this identifier to cite or link to this item:
Title: Development of a cortex processor based embedded system
Authors: Khassanov, Yerbolat.
Keywords: DRNTU::Engineering::Computer science and engineering::Hardware
Issue Date: 2012
Abstract: This report presents complete development cycle of a Cortex‐M3 based embedded system. It starts from researching for a suitable processing core chip followed by design and implementation of the hardware. Subsequently, it goes through the testing and debugging phases, and finally developing of software to run on the board. During the course of this project ARM’s Cortex processor – LPC1768 – was used for the development purpose. It will be referred to as the “LPC1768 development board” from this point onwards. The LPC1768 development board was built based on the following phases of the development cycle: 1. A schematic design based from a developed LPC1768 controller board 2. A four‐layer Printed Circuit Board (PCB) design of the LPC1768 development board 3. Soldering of required components and testing of the PCB 4. Choosing the appropriate firmware for downloading programs into the board 5. Testing the functionalities of the various modules on the board
Schools: School of Computer Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:SCSE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
  Restricted Access
12.15 MBAdobe PDFView/Open

Page view(s)

Updated on Jun 20, 2024


Updated on Jun 20, 2024

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.