Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/49170
Title: Experimental testing on plastic hinge formation on steel beams : deflection and rotation angle profiles
Authors: Jacky Poea
Keywords: DRNTU::Engineering::Civil engineering::Structures and design
Issue Date: 2012
Abstract: In this project, study on the formation of plastic hinge including the spread of plastic zone and the length of the plastic hinge, the deflection and rotation angle profiles are carried out by experimental testing on Laboratory and finite element (FE) modelling using the general purpose FE software, ABAQUS. Six RHS steel beams (three specimens of 75mm x 50mm x 6mm and three specimens of 50mm x 75mm x 6mm) are tested with the propped cantilever support condition. An incremental single point load will be applied to the mid span of each test. Instrumentation such as strain gauges, LVDTs, digital camera, graph paper, etc. are installed to capture all the relevant data.
URI: http://hdl.handle.net/10356/49170
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:CEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
CST12.pdf
  Restricted Access
3.65 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.