Please use this identifier to cite or link to this item:
Title: Fabrication and testing of GLARE specimens
Authors: Lim, Kendrick Zi Yang.
Keywords: DRNTU::Engineering::Aeronautical engineering
Issue Date: 2012
Abstract: This report presents the results for the fabrication and testing of GLARE specimens. The mechanical properties were understood through the quasi-static tests and low velocity impact tests, and the results were compared with results obtained from Finite Element Method. This project also studied the difference in strength of GLARE specimens fabricated using different curing methods. The autoclave curing method was compared to the oven post-curing method using the quasi-static test and the oven post-curing method was found to be the better method. Specimens with the 2/1 configuration were compared to specimens with the 2/2 configuration. It was observed that an extra glass fiber layer in between the aluminum layers does not affect the impact performance of GLARE significantly.
Schools: School of Mechanical and Aerospace Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
  Restricted Access
Fabrication and Testing of GLARE Specimens11.2 MBAdobe PDFView/Open

Page view(s) 50

Updated on Sep 29, 2023

Download(s) 50

Updated on Sep 29, 2023

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.