Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/49428
Title: Flow investigation in a centrifugal pump
Authors: Abdul Razak Juma'at
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2012
Abstract: A computational fluid dynamic simulation was conducted using ANSYS FLUENT v 13.0 to investigate the flow in a centrifugal blood pump. The modelling process was conducted using the design program GAMBIT. 4 different models were designed, each having different clearance gap sizes; 0.2mm, 0.3mm, 0.4mm and 0.5mm gap. During the simulation, the leakage flow, pressure and velocity distribution was analysed with the boundary conditions of 2000 rpm rotational impeller speed and inlet flow rate ranging from 1 litre per minute to 7 litres per minute. A separate simulation was done for each of the 4 pumps with the differing gap sizes as well.
URI: http://hdl.handle.net/10356/49428
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
M(B136).pdf
  Restricted Access
3.3 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.