Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/49461
Title: Series-connected renewable power generation
Authors: Wang, Gian Fatt
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Electric power::Production, transmission and distribution
Issue Date: 2012
Abstract: The time-varying photovoltaic (PV) power generation caused by the short fluctuation of irradiance and cloud cover result in power quality problems when the solar power is injected into the power grid. The intention of this project is to build a single phase series connected photovoltaic system with the Maximum Power Point Tracking (MPPT). It is a 230V, 50Hz grid to be connected in series. The power electronic converter system consists of a DC-DC voltage booster and a DC-AC single phase full bridge inverter. The devices are built with the gate signal generated and controlled by dSPACE CS1103 controller device, with the aid of MATLAB/Simulink. This report focuses on the design of the PV circuit, MPPT system model and dc-dc converter model using MATLAB/Simulink. The development and implementation of the prototype system has been carried out. The simulation result on the model output and hardware implementation test result are discussed.
URI: http://hdl.handle.net/10356/49461
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
EA1008-111.pdf
  Restricted Access
4.41 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.