dc.contributor.authorWong, Stephen Chee Khuen
dc.date.accessioned2012-05-21T03:57:32Z
dc.date.accessioned2017-07-23T08:40:25Z
dc.date.available2012-05-21T03:57:32Z
dc.date.available2017-07-23T08:40:25Z
dc.date.copyright2012en_US
dc.date.issued2012
dc.identifier.citationWong, S. C. K. (2012). Development of a flip-chip composite interconnection system. Doctoral thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/49500
dc.description.abstractThe objective of this research is to develop a novel flip-chip composite interconnect structure to overcome the inherent weaknesses of the conventional solder bump interconnection. In the conventional flip-chip, 3-D stacking of chips is often not feasible due to the inherent solder bump collapse during reflow. The under-bump-metallization (UBM) compatibility with Pb-free solder is a concern, especially with the miniaturization trend. The thin UBM is susceptible to electromigration and metal diffusion. The proposed flip-chip composite structure comprises a Cu pillar with a pinhead on its end which serves as an extended pad for solder bump attachment. The concern of UBM failure on a chip is mitigated as the pinhead which replaces the pad metallization on the chip is extended on a Cu pillar. The chip is no longer exposed to solder reaction during the reflow process. An electrolytic Ni-Au UBM scheme is selected for the Cu pinhead (CPH) pillar bump as the UBM deposition can be carried out in the same plating process for CPH pillars fabrication. Sn-Ag-Cu (SAC) solder and Ni-Au UBM interfacial reaction was investigated. EDX analyses identified a (Ni,Cu)3Sn4 IMC on the Ni UBM interface and a second layer of (Cu,Ni)6Sn5 was formed on top of the (Ni,Cu)3Sn4 IMC. The Ni UBM dissolution after reflow and isothermal aging is approximately 1 µm. A UBM thickness of 2.0 -2.5 µm is recommended for the CPH pillar bump solder attachment.en_US
dc.format.extent229 p.en_US
dc.language.isoenen_US
dc.subjectDRNTU::Engineering::Mechanical engineering::Mechatronicsen_US
dc.titleDevelopment of a flip-chip composite interconnection systemen_US
dc.typeThesis
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.contributor.supervisorPang Hock Lye, Johnen_US
dc.description.degreeDOCTOR OF PHILOSOPHY (MAE)en_US


Files in this item

FilesSizeFormatView
Tm0302524A.pdf8.125Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record