Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/49557
Title: Solar-wind street lighting - 1
Authors: Yeo, Howe Li.
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Power electronics
Issue Date: 2012
Abstract: In this report, a maximum power point tracker was designed, constructed and tested for the PV portion of a solar-wind street lamp. Experiments were conducted on the roof of S2 to obtain the electrical characteristics of the solar panel for simulation and design. An ATMEGA8 microcontroller along with a DC-DC converter, a current sensing circuit and a voltage sensing circuit was used to implement the Perturb and observe algorithm (P&O). In addition to this, the design of a master controller consisting of a single inductor multi input multi output(SI MIMO) DC-DC converter that manages the power flow of the input energy sources was also explored. The SI MIMO portion was simulated using PSPICE but results were inconclusive. Programming aspects involved in the master controller’s logic, in particular the use of the inter-integrated circuit (I2C) protocol was also discussed.
URI: http://hdl.handle.net/10356/49557
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
EA6131-111.pdf
  Restricted Access
Main article3.48 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.