Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPhoon, Clarence Jian Zhong.
dc.description.abstractThe design, simulation, fabrication and measurement of a 5GHz horizontally polarized omnidirectional antenna for WLAN application are presented. The antenna adopts the structure of a slot antenna with 2 side grounds. CST Microwave Studio Suite was used for simulation purposes. The finalized designed antenna is fabricated on a Taconic TL-6 substrate. This paper examines how changes in various parameters affect the S-Parameter curve and radiation pattern of the antenna. The E field of the antenna was slightly less omnidirectional than expected at the azimuth angle of plus minus 60 degrees. However, the gain of the antenna was better than expected at 5.0-5.2GHz.en_US
dc.format.extent58 p.en_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radioen_US
dc.titleOmnidirectional antenna for WLAN applicationen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorShen Zhongxiangen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
dc.contributor.organizationA*STAR Institute for Infocomm Researchen_US
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
  Restricted Access
2.04 MBAdobe PDFView/Open

Page view(s)

checked on Oct 23, 2020


checked on Oct 23, 2020

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.