Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/50112
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChye, Jessica Yan Mei.
dc.date.accessioned2012-05-30T02:04:23Z
dc.date.available2012-05-30T02:04:23Z
dc.date.copyright2012en_US
dc.date.issued2012
dc.identifier.urihttp://hdl.handle.net/10356/50112
dc.description.abstractThe main focus of this project will be the fabrication and assembly of a working microfluidic device. Microchannel production is a three step process. First, UV lithography is used to fabricate the reusable master. Polydimethylsiloxane, commonly known as PDMS, is then used to cast the master thus creating the microchannels via soft lithography. Finally, the PDMS is then bonded onto a glass slide and ready for use. There are many promising applications for microfluidic devices, with one of the first pioneering applications integrated in ink-jet printers by Hewlett-Packard. Today, Lab-on-a-chip technologies can be seen in many day to day applications like blood glucose monitors, to forensic investigation kits where the quantity of the biological media in question is very limited. Due to its vast potential, this field is constantly researched to find cheaper alternatives with high yield. Typical flow focusing microfuidic channels are the main focus of this project. Experiments have been done to fine tune the fabrication steps as mentioned. Both successes and failures were documented.en_US
dc.format.extent62 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Nanotechnologyen_US
dc.titleFabrication of microfluidic droplet former.en_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.schoolSchool of Chemical and Biomedical Engineeringen_US
dc.description.degreeBachelor of Engineering (Chemical and Biomolecular Engineering)en_US
dc.contributor.supervisor2Kang Yuejunen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:SCBE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
SCBE023.pdf
  Restricted Access
Fabrication of microfluidic droplet former1.34 MBAdobe PDFView/Open

Page view(s)

198
Updated on Nov 30, 2020

Download(s) 50

10
Updated on Nov 30, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.